Table Hardware and Bed Hardware

Bullsye bolt hole covers are for decorative application, when you don't want the bolt holes to be seen. They also add decoration on mantle or wall clocks. Screws are ...

Complete unit consists of 2 pieces with one piece sliding inside the other piece creating a firm interlock. One of the most reasonable priced aligners on the market. ...

Table slides are all wood construction, no equalizers. Patented synthetic guide block will not shrink or swell. There are 3 boards/runners per unit. Unit width 3", ...

Table forks are used to hold table leaves together. The center to center distance of the fork is 2 3/8". For each leaf division you would need one pair of forks. ...

Brass Bullesye Bolt Hole covers are for decorative application, when you don't want the bolt hole to be seen. They also add decoration on mantle or wall clocks. Screws ...

The table apron leg bracket is used to attach the leg to the inside of the table skirt. Leg bracket is constructed of cold rolled steel.

Table slides are all wood construction, no equalizers. Patented synthetic guide block will not shrink or swell. There are 4 boards/runners per unit. Unit width 4", ...

These steel drop leaf supports have a nickel finish and are sold per pair. Minimum overhang to work properly is 1/2".

Bolt hole cover for decorative applications. Covers bolt holes in furniture, adds decoration on mantle or wall clocks. Screws included

The table apron leg brackets are used to connect the leg to the inside of the table skirt. The leg brackets are constructed of cold rolled steel.

Galvanized metal table slides will rise in middle when opened to keep the table level after inserting leaves. These table slides have no pulleys and a 1/4" nut ...

These 8" steel drop leaf supports have a nickel finish and are sold per pair. Additional ...