John Wright Acme, Lull And Porter Shutter Hinges And Fasteners

The patented Acme, Lull and Porter Shutter Hinge is used in applications when enough wood trim is exposed within the window opening to mount shutters. One side of the hinge is mortised into the edge of the shutter and the other into the window casement

John Wright's Acme, Lull & Porter hinges feature the original design and an exact fit for most old hinges of the same type. The cam system locks the hinge in the open position. Shutters lift off without tools. Each set contains (2) left-hand hinges, (2) right-hand hinges, and (2) sets of fasteners, enough shutter hardware to complete one window.

Choose a size that gives you the best clearance from the window casement. Proper clearance from the surface of the housing is important for ventilating purposes.

• These hinges are raw cast iron and should be sealed or painted to keep them from rusting!
• Designed so they cannot be lifted off by the wind
• Set includes hardware for one window: (2) left-handed hinges, (2) right-handed hinges, and (2) sets of latches. Mounting screws are not included.
• Weight Bearing is based on use of 2 hinges per shutter, with the shutter being no more than 24" wide and 60" tall. 3 1/8" and 3 3/4" hinges will hold up to 25 lbs. 4 1/2", 5", and 5 1/2" hinges will hold up to 50 lbs.