Skip to Main Content Skip to Footer Content

Kent Design 313C 3/4" Round Intercrimp Wire Grille

The average rating for this product is 4 out of 5 stars
Size
Finish
Store ID: 204101

The Kent Design #313C 3/4 Inch Round Intercrimp Decorative Wire Grilles


This is an oversized item. An additional $20.00 per 18" x 48" piece or $35.00 per 36" x 48" piece will be calculated in shipping charges at checkout.

NOTE: Antique finishes may have slight color variations to replicate the charm of natural aging and patina.

The Kent Design #313C 3/4 Inch Round Intercrimp decorative wire grilles are a simple way to dress up many projects from kitchens to fine furniture. These versatile woven wire grilles are available in many designs and finishes. They are manufactured from various gauges of steel wires that are custom crimped and woven to create unique designs. With decorative wire grilles it is easy to add a unique and distinguishing look to cabinets, hutches, bookcases, armoires, wine racks, pantry doors, entertainment centers, and much more.

  • Wire Size: .080"
  • Wire Style: Round Intercrimp
  • Mesh Size: 3/4"
  • Percentage of Open Area: 63.20%
  • Sheet Size: 18" x 24", 18" x 48", or 36" x 48"
  • Made in the USA
  • Finishes: Antique Brass, Antique Copper, Antique Silver, Satin Nickel, Satin Brass

Click Here to Order Up to 5 Samples!


Kent Design Decorative Wire Grille Cutting & Cleaning Instructions


Decorative Wire Grilles are NOT for outdoor use. The steel wire will rust in outdoor conditions.

Decorative Wire Grilles can be cut using tin snips, wire cutters, 14 gauge hand shears, and any metal cutting blade, depending on the gauge of the wire. Each design varies with wire gauge and crimp style.

We recommend that you make a template of the exact size you will be cutting for your application with some heavy cardboard or plywood. For smaller mesh openings (under 1/2"), we suggest planning on 3/4" spacing between any pieces you may be cutting out of standard sheet sizes. For larger mesh openings (over 3/4"), we suggest planning on 1" of space between each cut.

  • Wire corners may unravel during or after cutting, but pieces can be put back in during installation. The tension of the wires keeps the grille together.
  • Standard stock grilles are not welded.
  • Decorative wire grilles and chicken wire can be cleaned easily with a non-ammonia based cleaner.

    Specifications
    Additional Information Ships Ground Only
    Unit of Measure Each
    Product Review Summary
    Based on 1 review
    The average rating for this product is 4 out of 5 stars
    Overall Rating: 4.0/5.0
    Customer Reviews
    September 09, 2013
    Be sure you know what you are doing
    This shopper rated the product 4 out of 5 stars

    This material comes in a flat box and the edges are usually mangled. Do not plan on perfection or an exact 36x48. The wires are not welded but merely crimped over each other allowing for the piece to be expanded or contracted to increase or decrease the size as needed. I expanded the material to 55" by compressing along the short side and capturing it in a frame with a stop. The squares are no longer "Squares" but still give the same look. Cutting is easy with a grinder cut-off wheel and a straight edge or wire cutters. Caution sharp edges.

    Jason from CA
    You May Also Like