Designs of Distinction #402 1/4 Inch Cove Cut Rigid Tambour Insert Panel
Designs of Distinction #402 1/4 Inch Cove Cut Rigid Tambour Insert Panel
This is an oversized item. There will be an additional oversize shipping charge of $30.00 per panel on your order.
Give your cabinet drawers and doors one of the trendiest touches with these Rigid Tambour Insert Panels. These panels were designed specifically for use as an insert within a frame. They can be cut down to the necessary size using a table saw and inserted into the frame, allowing room for the panel to expand and contract within. They should also be finished on both sides in these applications.
NOTE: These panels are not meant to be used as a standalone panel and may suffer unwarranted damage when used in undesignated applications.
These panels are NOT flexible, they are rigid and will not bend.
These panels are available in a number of styles, including bead, square and cove-cut varieties. Choose from a variety of species like hard maple, oak, walnut, paint-grade and more.
| Brand | Designs of Distinction |
| Finish | Unfinished |
| Length | 46" |
| Material | Unfinished Hardwood |
| Instructions |  Rigid Tambour Specifications |
| Thickness | 1/4" |
| Unit of Measure | Each |
| Width | 24" |
| WARNING | This product can expose you to a chemical [or chemicals] which is [are] known to the state of California to cause cancer [and/or birth defects and/or other reproductive harm]. For more information go to www.p65warnings.ca.gov |
