Furniture Kit Assembly Rating:
Assembly Rating 1:
All component parts are cut, pre-drilled where necessary, and ready to glue and clamp. A minimal amount of shaping or trimming may be required by you. Locating and attaching hardware will be required where necessary. Suggested tools needed are: clamps, drill and appropriate bits, #R1 or #R2 square recess tip drivers, hammer and a nail set ( where needed). Glue, various grits of sanpaper, finish nails (used in some kits), stain and final finish are needed. Final sanding and finishing is left to your discretion.
Assembly Rating 2:
Most component parts are cut, pre-drilled where necessary, and ready to glue and clamp. Additional shaping and or cutting will be required by customer. Locating and attaching hardware will be required where necessary. Suggested tools needed are: miter saw, clamps, drill and appropriate bits, #R1 or #R2 square recess tip drivers, hammer and a nail set (where needed). Glue, various grits of sandpaper, finish nails (used in some kits), stain and final finish are needed. Final sanding and finishing are left to your discretion.
Assembly Rating 3:
Some component parts are cut. Additional layout, shaping and cutting will be required by you. Holes will need to be located and drilled. Locating and attaching hardware will be required where necesary. Suggested tools needed: miter saw, clamps, drill and appropriate bits, #R1 or #R2 square recess tip dirvers, hammer and a nail set (where needed). Glue, various grits of sandpaper, finish nails (used in some kits), stain and final finish are needed. Final sanding and finishing is left to customer discretion.