Silputty
Silputty is used to make instant impressions with this two-part, silicone elastomer, which can be mixed by finger kneading to a putty-like consistency. Once this two-part product is mixed, material can be pressed into the desired shape or around the desired object. It will cure at room temperature into a firm elastomer within a few minutes with 99.95% dimensional accuracy.
Silputty can be used to create candle and soap molds, to match antique moldings, trim, and frame repair. The needed part can be poured from Por-A-Kast or any casting material. This product has a six-month shelf life. MSDS sheets are included. Mix Instructions: These products are mixed in the ratio of 1 part by weight of cross-linker to 1 part by weight of base--visual estimation of proportions is usually sufficient. Measure out the desired quantities of respective components and mix by hand until color is uniform. Be careful not to mix more than can be applied in 3 minutes. Immediately after mixing pour or press material into desired surface--taking care to avoid air entrapment. Cure time: 15 minutes. Temperature will affect the cure rate with warmer materials curing much more rapidly. Silputty
Silputty is used to make instant impressions with this two-part, silicone elastomer, which can be mixed by finger kneading to a putty-like consistency. Once this two-part product is mixed, material can be pressed into the desired shape or around the desired object. It will cure at room temperature into a firm elastomer within a few minutes with 99.95% dimensional accuracy.
Silputty can be used to create candle and soap molds, to match antique moldings, trim, and frame repair. The needed part can be poured from Por-A-Kast or any casting material. This product has a six-month shelf life. MSDS sheets are included. Mix Instructions: These products are mixed in the ratio of 1 part by weight of cross-linker to 1 part by weight of base--visual estimation of proportions is usually sufficient. Measure out the desired quantities of respective components and mix by hand until color is uniform. Be careful not to mix more than can be applied in 3 minutes. Immediately after mixing pour or press material into desired surface--taking care to avoid air entrapment. Cure time: 15 minutes. Temperature will affect the cure rate with warmer materials curing much more rapidly.
